Power bug?

[Gadzoo]

Firstly, a very interesting little game. It has great potential. My compliments!

I just started playing about a week ago.

I build my first grain silo, oven, farm, still, water wells, and generators.

All works well except after assigning a worker to the silo, oven and still, he stops working after one cycle. I verified that he is "assigned" to do that task.

When I check their status, I see the "no power" shown. My small town has 4 generators so power is not the issue. I then send my main character over to operate the machinery and it works fine. After pulling him off that task, the assigned worker begins again, only to stop again after the cycle he is working on.

I also tried assigning different workers to each of these task with the same result.

Am I missing something. This sure seems like a bug.

Thanks

[oldseaweed]

I would check if their inventory is not full. If so, they are unable to get the raw material from farm to silo for example or when production reaches 5 to remove it to storage.
When a manufacture is not running it does not use power.
When you say that you have 4 generators it does not mean you have enough power. Check in the left status window under power example, (100/80) 100 is your production and 80 your consumption.1st number should be greater than 2nd one. Check often because all manufacturing do not operate at the same time you will get peak time when everything run at the same time.
Just an idea, could be something else.

[Gadzoo]

My power is 60/20 so that's cool. As I stated, when they stop working I send my main character over and he starts working the silo, I immediately pull him off and the guy assigned to the silo starts working again. This is true for the oven, the silo and the rum still.

Thanks for the help. Still stumped.